Mirus Bio receives ISO 13485:2016 certification, underscoring the quality of processes used to support GMP product portfolio. Read more

Ingenio® Electroporation Kit, for other Electroporators – 25 rxns, (0.4 cm Cuvettes/Droppers)

High efficiency electroporation using any instrument

SKU MIR 50113 Categories ,

$326.00

Description

  • High Efficiency Electroporation– Deliver to hard to transfect cell lines and primary cells
  • Compatible with Most Conventional Electroporation Devices – Use your existing system including the Ingenio® EZporator®, Lonza-Amaxa®, Bio-Rad® or Harvard BTX®
  • Save Money and Reduce Research Costs Without Sacrificing Performance – Ingenio® Electroporation Solution is available as a stand-alone solution or as part of a complete kit with cuvettes and cell droppers

 

Looking for a high quality, cost-effective electroporation device? The Ingenio® EZporator® Electroporation System  is perfect for labs seeking high performance without breaking the bank.

 

SKU: MIR 50113

Supporting Data

CRISPR RNP Delivery with Ingenio® Electroporation Solution. K562 and Jurkat cells were electroporated with a Cas9 protein/gRNA, ribonucleoprotein (RNP) complex, composed of 750 nM Cas9 protein (EnGen® Cas9 NLS, NEB) and 1500 nM pre-complexed two-part gRNA (IDT) targeting PPIB using the Ingenio® Electroporation Solution and a Gene Pulser Xcell™ Eukaryotic System. Exponential pulse conditions of 130V, 950 µF for K562 and 150V, 950 µF for Jurkat cells were applied to triplicate 0.2 cm cuvettes, 100 µl volume, 10 x 106 cells/ml +/- RNP complex. A T7E1 mismatch assay was used to measure cleavage efficiency at 48 hours post-transfection. Non-specific bands (NSP) were observed in the negative control of both cell lines. Cleavage efficiency was calculated based on the ratio of cleaved band intensities to the sum of cleaved and uncleaved band intensities minus the average signal of the non-specific band(s) in negative control lanes.

 

High Efficiency Plasmid DNA Electroporation of Human Induced Pluripotent Stem (iPS) Cells Using Ingenio®. The Ingenio® Electroporation Kit was used to transfect 2 x 106 iPS cells on the Amaxa® Nucleofector® II Device. Cells were electroporated with 8 µg ZsGreen expressing plasmid (Clontech) in 100 µl and plated in 6-well plates at 0.33 x 10cells/well. Cells were visualized 24 hours post-transfection and imaged under 4X objective with an Olympus IX71® Inverted Microscope. Images are (A) phase contrast, and (B) green fluorescence. Cells were also assayed 24 hours post-transfection on an Accuri® Cytometer. The histogram (C) shows unelectroporated cells (black line) compared to cells electroporated with plasmid using the Ingenio® Electroporation Kit (green line). See more information on stem cell applications.

Data courtesy of

 

Ingenio® Solution Provides Comparable Efficiency on Amaxa® Nucleofector® Device. Cells were electroporated in parallel with an EGFP reporter vector using a Nucleofector® II Device (Amaxa®) and either the Ingenio® Electroporation Solution or the Nucleofector® Kit V (Amaxa®) according to Amaxa®’s recommended protocol for each cell line [HL-60 (T-019), Jurkat E6-1(X-001), K-562 (T-016), THP-1 (V-001), SK-N-MC (A-023), and MCF-7 (P020)]. EGFP expressing cells were identified 24 hours post-electroporation by flow cytometry and presented as a percentage of the live cell population.

 

Efficient Plasmid DNA Delivery Using Ingenio® Solution with Amaxa® Nucleofector® Device. Ingenio® Electroporation Kits were used to transfect indicated cell types using Amaxa® Nucleofector® II Device. Cells were assayed at 24 hours by flow cytometry and reported as percentage of live cell population. See the recommended experimental conditions (PDF).

*Primary cell types

 

Ingenio® Outperforms Other Electroporation Solutions in Efficiency and Viability. Cells were electroporated in parallel with an EGFP reporter vector using either Ingenio® Electroporation Solution, PBS or the Gene Pulser Electroporation Buffer (Bio-Rad®) on the Gene Pulser Xcell™ Eukaryotic System. (A) EGFP expressing cells were identified 24 hours post-electroporation by flow cytometry and presented as a percentage of the live cell population. (B) Cells were assayed for viability by propidium iodide staining and flow cytometry analysis. Experiments were performed in triplicate on three separate days and the data averaged.

 

Using Standard Electroporators, Ingenio® Provides High Efficiency Electroporation of Hard to Transfect Cell Lines. Cells were electroporated with an EGFP reporter vector using the Ingenio® Electroporation Solution and a Gene Pulser Xcell™ Eukaryotic System. EGFP expressing cells were identified 24 hours post-electroporation by flow cytometry and presented as a percentage of the live cell population. See the recommended pulse conditions (PDF).

Resources

Specifications

Storage Conditions
All Configurations: Store solution at 4°C, store cuvettes and droppers at room temperature

Product Guarantee
All Configurations: 1 year

Usage Statement
All Configurations: For Research Use Only.

Animal Origin Statement
All Configurations: This product is animal origin free.

Technical Product Literature

Full Protocols
Ingenio® Full Electroporation Protocol (PDF)

Additional Protocols
CRISPR RNP Electroporation Protocol (PDF)
iPSC Electroporation Quick Reference Protocol (PDF)

Quick Reference Protocols
Ingenio® Quick Ref Protocol (PDF)

SDS
Ingenio® Solution and Kits SDS (PDF)

Additional Resources

Ingenio® Pulse Conditions (PDF)

FAQs

See the Ingenio Electroporation FAQs

Using transfection reagents and enhancers from Mirus has given our platform a competitive advantage. Increasing efficiency and lowering costs for all of our programs.

Sally Mader, PhD
ZYZ Theraputics